High quality encapsulated toroidal transformers with a single 230V a.c., 50/60Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently. Designed for easy mounting with centre hole fixing.
Fully encapsulated
Small size and low weight compared with traditional stacked lamination types
Extremely low level of radiated magnetic field
Very low induced noise (hum)
Very low iron loss
Double insulated primary leads
100% electrical and flash tested
High quality manufacturing and testing in accordance to:
EN61558, EN60742, EN60950, EN60065, VDE0551, VDE0550 and BS415
Tested and Approved by KEMA to EN61558.
UL Recognised to UL506
Rated VA
Part Number
(xxx=Sec. voltage)
Regulation %
Typical
Temperature Rise
[K]
Dimensions*
Diameter [mm]
Height
[mm]
Fixing Hole
Weight
[Kg]
15
0015P1-2-xxxK
16
26
63
35
M5
0.30
30
0030P1-2-xxxK
18
40
82
39
M5
0.45
50
0050P1-2-xxxK
14
42
87
42
M5
0.65
80
0080P1-2-xxxK
14
53
104
44
M6
0.90
120
0120P1-2-xxxK
10
52
104
52
M6
1.20
160
0160P1-2-xxxK
9
55
115
53
M6
1.50
225
0225P1-2-xxxK
8
60
126
52
M6
2.00
300
0300P1-2-xxxK
8
60
126
65
M6
2.30
500
0500P1-2-xxxK
6
68
148
65
M8
3.50
Leads: PVC insulated 150mm long.
Secondary voltage tolerance: <1% at nominal input and full load
Maximum ambient operating temperature 40°C
UL recognised for Insulation Class A (105°C)
Meets all requirements of class E (120°C)
Important Installation Note
Fixing screws are not provided. Under no circumstances should both ends of the fixing bolt contact a metal chassis or frame as this would create a "shorted turn" causing irreparable damage.