EI42 - Encapsulated PCB Mount 50/60Hz Transformer - 5.4-8.5VA
Our comprehensive selection of products also includes a series of EI42 safety transformers for PCB mounting.
High-quality encapsulated vacuum potted transformers. Output power from 4.6VA.
View from PCB
Solder pins 0.8 mm Ø
- Grid 5 mm
Type
*
Stack Height mm
Case Height (H) mm
Weight g
EI42-12A/7.../...
70°C/B
6...36V - 5.40 VA
2x6...18V - 2x2.30 VA
x
nkf
14.8
31.5
196
EI42-12F/7.../...
70°C/B
6...34V - 5.80 VA
2x6...17V - 2x2.90 VA
x
bkf
14.8
31.5
196
EI42-32A/7.../...
70°C/B
6...39V - 7.40 VA
2x6...19V - 2x3.70 VA
x
nkf
20.0
38.0
255
EI42-32F/7.../...
40°C/B
6...37V - 8.50 VA
2x6...18V - 2x4.25 VA
x
bkf
20.0
38.0
255
Approved to EN 60742
Vacuum cast
Two chamber coil
Safety class II
Protective system IP 00
Conditionally short-circuit proof (*bkf) through built-in temperature fuse, or not short-circuit proof (*nkf) but protected by external fuse on primary or secondary
Note: If using the conditionally short-circuit proof transformer type (*bkf), no strip conductors may be guided between the primary connecting pins on the component insertion side, because in this area there is an unprotected live soldering terminal.